Description

ADJUST YOUR TOE IN AND CAMBER!

USE THESE ADJUSTABLE RADIUS RODS TO CORRECT THE TOE IN FOR HIGH SPEED STABILITY.

The standard radius arms dont last long and when you have slop in the rear wheel it will likely be from your standard units wearing out or broke.

Upgrade to these heavy duty race tested Cougar Racing Radius Arms.

6  Arms, 2 Top, middle and bottom. 12 Rodends Left and Right hand thread inc jamnuts and 24 spacers.

TIP 1 : When assembling, wind the jamnut up tight on the rodend then back it off 10 half turns and thread it into the arm being careful not to move the nut on rodend, this will equal the standard length. Now compare them to your standard arms your replacing to determine top, middle and bottom. Tighten the bottom arm in poition and use the top arm to set camber. Use string line measurements to set toe in with centre arm.

TIP 2: Fit the Can Am Toe Link Support (TLS) Kit for 3/4 Rod Ends at the same time as the Radius Rods